During long journeys with family and friends music might turn out to be boring. For little entertainment movies can be used using some DVD players and LCD screens in the car. There are few very important instructions on how to create a mobile video system. To create a mobile video system we need a stereo with DVD facilities, LCD screens, some tools, wires and some knowledge regarding connection. All we need to do is to fix the screens or monitors in preferred location in the car and then connect it to the DVD player with the help of some wires. This method can be followed to all types of cars and vans.<br><br>Before we discuss the process to fix a video system we need some things that will help us. A set of tools is very essential and it might consist of screws, bolts, wires, tapes and other common tools. We also need either an LCD panel or television set of 12 volts. This is ideal to be run on the car?s battery. A DVD player is another important thing to have. This can either be ordinary DVD player or the one that is capable of running from the stereo. After the above materials are available the following steps can be followed to create a video system in a car.<br><br>The first step is to choose a position for the LCD panel or television. Once this is confirmed, the screens have to be fixed in that particular position.<br><br>Secondly, the location of the DVD player must be decided and be fixed in that location. If the car has a stereo set that has proper facility to play DVD, the stereo can be used for the same. The stereo need not necessarily have a screen since other LCD or television is used for viewing.<br><br>After fixing both the monitors and the player, the cable for audio and video are connected between both LCD panel and the DVD player. The cables may be concealed for a neater and safer look.<br><br>Sometimes in case of a bigger car or van, multiple screens may be preferred. In such cases, a number of LCD screens of 12 volts can be fixed in various locations.<br><br>After the locations are finalized and fixed, the wiring is done from the DVD player to the various screens using an audio video amplifier or splitter. This ensures good quality to all the screens. All the audio video splitters are connected to the output jack of the splitters. Then the cables are connected as a single set between the splitter input jacks to the output jack of the DVD player.<br><br>The connections have to be done carefully to have the best results of clarity and good audio. The above discussion on how to create a mobile video system will prove to be very useful to people who are amateurs and have no expertise. The instructions are clear and need very little knowledge regarding the tools and electrical connections.